tiistai 6. marraskuuta 2018

MOOTTORISAHA PYÖRÄ.
(CHAINSAW BIKE, English version below)

Tuli tosiaan tuossa 2015 rakennettua moottorisahasta mopoon moottori.
Kaikkihan lähti siittä kun sain moottorisahan appiukolta ku se ei sitä ennää rivitalossa tarvinu.
Ei sillähetkellä kyllä ollu itelläkkää sille käyttöä nii antoin olla sitte varastossa...
En sitte tiiä mistä sain idean ruveta vääntää siittä moottoria pyörään, mutta alkoin ettii youtubesta videoita.. sieltähä löytää kaikki 😂.
Tämä kuva taitaa olla aika lähellä sitä minkä sillon näin

YOUTUBE VIDEON SAHAPYÖRÄ

Tuossaha lukkee että 55-60 km/h.... just. Ehkä jos on tarpeeks iso saha

 Mullaha oli yks ylimääränen pyörä jonka kunnostamiseen ois menny jo nii palio aikaa ja rahhaa että ois jo voinu jostai torista kaivaa halvemmalla.
Tämäki yksilö oli nojjaillu mökin seinään viimeset kymmenen vuotta, oli meinaa sen verran ruostetta ja suoraa sanottuna paskaa kertyny jo jokapaikkaa että hyi 😒
Siitähä se rupes rakentuu eka moppedi.
Ensimmäinen versio oli kyllä meleko laite

MOOTTORISAHA PYÖRÄ

Täsä kävi eka kiinnityksen kans semmonen homma etten muistanu kattua kumpaan suuntaa se ees pyörii. Kyllähä se vit()%#¤ ku kaikki oli paikallaa ja laitoin käyntii...Saat"¤# taaksepäin 😅
Nämähä vissii sais pyörii vääräänki suuntaa nää sahat, mutta ei taia olla pitemmän päälle viisasta, en oo kyllä siitä ihan varma.
Ajattelin että ketjuveto ois kyllä hyvä nii ei luistas kumia vasten. Piti vaa vaihtaa takarengas vaihepakan takia että sai veon eri rattaille ku polkimet...

KETJUVETO


O vaa aika vaarallinen jos tuo tuosta napsahtaa poikki siinä 60km/h vauhissa. Voi sanoa että sanomista ei tulis, ku ei ennää pystys 😄.
Mutta miettikää aina just kaikki tämmöset asiat ennenku lähette testailee keksintöjä, ettei vaa kävis mittää 😉
Noo, sain sitte käännettyä moottorin ja ei muutako testiin.

Kyllähä se vähäaikaa toimiki. Muistaakseni nuo polkimet pyöri meleko vauhtia ku sen sai liikkeelle. Ei siinä pysy jalat perässä, ja koitappa laittaa jalat takas polkimille ku vauhti alkaa hyytyy... en suosittele. Lopuksiha siitä pamahti kytkin rikki 😢
Eihä tuommoseen vanahaan mikämikä sahhaan löyvy kovin heleposti varaosia. Pariviikkoa etin kytkintä, mutta turhaa.
Muistan jonku pienkone korjaamon sivun jossa aukiolot oli: Olemme auki jos emme ole lähteneet ryyppäämään, hyvää joulua 😂. En muista oliko joulu ees lähellä mutta kummiski (En päässy ikinä käymää siellä)

... Saha lopulta romukoppaan ja nettii... Meni se pyöräki takas vintille oottelee jottai muuta rojektia.

Meillähän kävi tässä välissä varkaita pihalla ja vei tytön pyörän... per/¤"

MADISON CHERRY

Tämmönen pyörä lähti niitten mukkaan. Oisko ollu ees vuotta vanha. Kautta rantain tyttö sai kuulla kuka sen oli vieny, nii vaimoha se lähti käymää sitte varkaitten juttusilla. Sai se vähä aikaa kysellä pyörän olinpaikkaa, mutta lopulta se löyty... tai se mitä siitä oli jälellä. Perk"# pennut oli purkanu sen ossiin ja myyny etteenpäin. Ei tarvinu ku mennä tienpäähän, sieltä löyty!

Saatiin kumminki runko ja paskaks väännetty takarengas takas, joka oli edelleen lukossa.

Pappa osti tytölle uuen pyörän ja vanha jäi projektiin.
Kavereilta sain joitai renkaita, ja muista rommuista sai sitte tangot ym.

No Tori.fistähä se löyty, 20€ moottisaha. En siinä vaiheessa ees ajatellu että minkä kokonen ym se on, ku äkkiä hakia pois 😂

Sittehä se oli sen räpellys tuoho toiseen pyörään. Hirviästi pulttia ja mutteria, reikärautaa ja kulmarautaa. Vanha tarakka kävi hyvin petinä moottorille. Tämän laitoin kitkavedolla kumeen... Pysy

KITKAMUTTERI

Tuohon sahan kytkimeen piti hitsata iso mutteri että sai pitoa renkaaseen.
Tai no, eihän se ensin muutako sutannu kumen päällystä, mutta ku laski renkaasta ilmat, laski moottoria ja kumeen ilmaa, rupes ollee pitoa.

Sittehä se piti kattoa miten tuo sahan sammutin toimi, ja kytkeä napilla ohjaustankoon.

ON/OFF NAPPI

Sitten vielä kaasu jostai vanhasta jarruvaijerista moottrilta, jarrulle. On vähä erikoinen ratkasu mutta toimiva 😄

KAASU

Ensimmäisten testejen aikan huomasin että saha vuoti ketjuöljyt suoraa renkaalle ja heitti kaikki pitkin selkää ja luistatti mutteria renkaan päällä. Vi()&(/ että oli mennä hermo...
Mutta loppuha se öljy sieltä ja sitte pysty huoletta ajelee 😏

Tässä linkki videoon:
https://www.youtube.com/watch?v=cAEWAuj-CIE&t=5s
HEMI-kko Youtube

Tässä lopputulos. Ei ennää mikkää Madison Cherry 😒
Ei tämä ainakaa 60km/h mee, mutta sen se mennee minkä jaksat alkuvauhiksi polkea 😂
Eikä kyllä taia saaha mitenkään tieliikenne kelposeks, mutta mukavaha tämmösellä o vaikka ajella pitkin mökkiteitä 😉

MOOTTORISAHA PYÖRÄ

Tätä pyöräähä o muokattu vielä tämän jäläkeenki, mutta kirjottelen siitä sitte myöhemmin 😉

Palataampa taas astialle... voi hel"%#¤ , Astialle 😅

_____________________________________________________________________________________________________________________________________________________

CHAINSAW BIKE, English version

I seriously did at 2015 bike that had chainsaw motor in it.
Everything started when i got my first chainsaw from my fatherinlaw, he didnt need it anymore, cause had moved in to rowhouse.
I didnt have any use for it right then, so i stored it...until
I dont know where did the idea pop to my head, but i searched chainsaw bike at youtube... there you can find anything 😂.
I think this picture is closest the one video i saw first

YOUTUBE VIDEO SAW BIKE

It says there that 55-60 km/h... right. Mayby if you have big enough saw

 I did have one bike that would cost too much to repair correctly. It wasnt worth it. Parts and labour would cost enought to by some working cheap bike from internet.
This one had stand against the wall for 10 years at cabin. There was so much rust and quite frankly Shit that i almoust womit  😒
So this would be good for my first DIY moupped 😎

CHAINSAW BIKE

First mistake was! When i mounted the motor to trunk, i didnt see witch way the motor rotated. I was fu)%¤ when i got it to place and started...Sh%#¤" it was backward 😅
I think u could run these old saws bacward, but im not sure.
I thought it would be good to but pull straight whit chain so it would not slide so much. Had to chance back tire for more gears so you could still pedal and use motor at same time...

CHAIN PULL


It´s pretty dangerous if that chain snaps. I can tell that there would NOT be any saying, because you could not  😄.
I give u adwise. Always think trough what could happen before starting the test drives 😉 and always cover everything that can get loose.
well, i did turn the engine and started the testing.

I did work, but if i remeber correcly the pedals rotated very fast when u got it to move. My feet could not maintain the speed. And it was doomed when i tryed to put my feet back to pedals when speed slowed... i dont recomend. And finally the cluch cave up 😢
It was so old chainsaw that the parts was too hard to find. I did look for 2 weeks for cluch, but nothing.
I remember one small engine repair busines that had sign: Were open if we havent gone drinking, happy cristmas 😂.
Cant remember was it even near christmas 😆 (never got there when open)

... I gave up. Chainsaw to garbagebin and to the internet... I did save the bike too for another project

Meanwhile we had thieves at our yard. They stoled our girls bike.. Dammit

MADISON CHERRY

Like this one left whit them. Wasnt even year old bike.
Girl head from bush radio who had stolen it. My wife looked them up and finally had the bike back... what was left of it. Fu#¤ kids had dissemble it and sold the parts. It was at the end of our own road.

We did get frame and crooked back tire back, and the lock that was still closed.

Grandad bought our girl a new bike and the old junk was left for some project... or the chainsaw bike that i was working at 😂
I had few tires from friends and got the rest of the parts from old scrap.

Yes, found the motor at internet, 20€ for chainsaw. I didnt even looked for any size or specs, had to have it fasts 😂

Then there was the mounting. Lots of bolts and nuts, steel whit holes and corner steel. Old trunk was good base for motor. I did use friction pull for this model.

FRICTION NUT

I welded big nut at the cluch for more grip to tire.
well. i did slide at first, but i emptyed the tire and lowered the engine, but air back in and now we had friction.

Then i had to figure out how does the turn off work, and connect it to button at handlebar.

ON/OFF BUTTON

Then there was the throttle. i used an old brakewire and pulled it from handle to motor. Its pretty unic but working 😄

THROTTLE

At first test i noticed thet the saw bleeded chain oil all over the nut and the tire. My back was full of oil and the nut just slided at the tire. Fu¤#%, i almous lost it then...
But the chain oli run out and the friction came back. then it worked great 😏

Heres link to video:
https://www.youtube.com/watch?v=cAEWAuj-CIE&t=5s
HEMI-kko Youtube

Heres the final product. Not Madison cherry anymore 😒
This doesnt run 60 km/h, but it goes what you can pedal for speed 😂
Idont think u can get it to road legal, but its fun to drive example at capon roads 😉

CHAINSAW BIKE

This bike has been modified after this motor, but i write about it later 😉

I´ll be back... oh fu#¤", Arnold Schwarzenegger  😅




Ei kommentteja:

Lähetä kommentti