sunnuntai 3. maaliskuuta 2019

METALLITYÖT. MUTTERI / PULTTI LELUT
(METALWORKS. ENGLISH VERSION BELOW)



Näin näitä pultti mutteri teoksia ja ajattelin itekki tekasta pojalle leluiks.

Nehä oli tietenki hitsailtu jollai migillä ja varmaan ammatti hitsarit tehny 😆. Ei näitä mun räkimisiä tällä vanhalla Arc power 1400 voi ees verrata, mutta tulipaha kokeiltua.

HITSAUSKONE
Mullaha oli jo pultteja ja muttereita, mutta tuntu ettei oo tarpeeks 😉. Eli puuiloon ja kassi täyteen pultteja, muttereita ja prikkoja. Kyllähä neki makso, mutta niitä aina tarvii 😄



Ensin ajattelin tehdä koiran. Se näytti helpolta ja ei tarvinu ku pari pulttia ja mutteria.

Semmonen työpöytä ois kova sana johon sais osat kiinni. Varsinki jos näin pieniä osia hitsailee.
Koitin sitte maajohdolla lukita yhen osan ja pihteillä toista pittää paikallaan.

HITSAUS
Kyllähä siinä hermo mennee ku puikko ei mainaa millään palaa, ja sitte ku se palaa nii ei vaan tartu 😡 (10millin kuonat 😄)

On nii pieniä nuo mun puikot ja virtaakaa ei enempää uskalla laittaa ku koko puikko on punasena 😄

No. Kyllä se siitä pikkuhiliaa kasaantu, mutta jälkiki o aika kauhiaa 😆

HITSAUS JÄLKI 😂
Yritin sitte hioakki mirgelillä ja tremelillä, mutta eihä kaikkii koloihin enää päässy käsiks 😢.

Viimenen silaus porakoneeseen liitetyllä teräsharjalla ja valmis.

TERÄSHARJA PÄÄLLÄ PUHDISTUS



KOIRA
Kyllä se koiraa muistuttaa. Mittasuhteet vähä saattaa heittää 😆

Tein näihin jokaiseen oman videon ku muuten ois tullu nii pitkä. Aattelin että ennemmin ihmiset kattelee lyhyiä videoita, ja ei tarvi ettiä aikajanalta erikseen jottai näistä töistä jos haluaa tehä ite.

Eli tässä video linkki tähän koiraan:
https://www.youtube.com/watch?v=AoY5EN1EtP4

Näissähä on kaikissa käytetty pikkusen eri tapoja, mutta perus teko tavat on samat.

Löysin tuommosia laakereita pussillisen nii aattelin sitte tehä pyörän, ihan pyörivillä renkailla.

LAAKERIT
Sitte toistettiin kaikki ensimmäisessä koirassa tehdyt virheet 😆
Mutta valmistu seki.



PYÖRÄ, valmis.
Kyllä se pyörältä näyttää, renkaat pyörii ja pysyy pystyssäki 😆. Onhan siinä melko hitsinöölit, mutta ei se menoa haittaa.

Tässä linkki tähän videoon:
https://www.youtube.com/watch?v=KejQPN2VimI

Sitte nuista prikoista ajattelin väännellä kilpikonnan. Mullaha oli tuo tamppi minkä tein nuita sormuksia varten. Sehä passas tähän projektiin paremmin ku hyvin.

RAUTA KARTIO
Ajattelin muotoilla nuita prikkoja kuperaksi ja tehä niistä kilpikonnalle kilven.
Niitä aikani hakkailtua hylsyn kans piti jo alkaa ettimään jottai millä lämmittää nuita prikkoja että vähän pehmenis.
Ei mulla edelleenkää ollu ku tuo sytkäri, ja kaasuha siitä loppuu aika nopiaa 😣.

PRIKAN LÄMMITYS
Ens kauppareissulla kyllä ostan jo jonku tohon, ku sitä näyttää tarvivan 😆

Lopulta sain kolme prikkaa kuperaksi ja sitten oliki pari nööliä vetästävä.
Pää pultin nokkaan ja mutterit jaloks.
Kilpi kunnalla 10millin avaimella kiinni ja viimeistely tremelillä. Kilven päältä pultti poikki ja kevyt hionta ettei jää teräviä reunoja. (Ja tietenki teräsharjalla putsaus)



KILPIKONNA, Valmis
Tämähä rupes näyttää jo hyvältä. Ainut mikä vähä ottaa silmään on tuo kaula 😄

Sitte viimesenä oli suunnitelmissa moottoripyörä. Jossain näin ku moottori osa tehtiin prikoilla ja pulteilla, nii oliha se pakko kokeilla.

PRIKOISTA TEHTY MOOTTORI
Tämä sitten mirgelissä nelikulmaiseksi, ja mutteri pultteja yhdistämään.

MOOTTORI
Tämä miellytti jo omaaki silmää 😉
Ostin 2 isompaa muteria just tätä varten ja aattelin tehä niistä renkaat. On kumminki sen verran leveät että pysyy pystyssä vaikka painoa tuleeki.

RENKAAT
Sitte pari pitempää pulttia etu-haarukoiksi ja lyhemmät taakse. Antaa kuitenki oikeanlaisen vaikutelman.
Pitkä pultti keskirungoksi ja mutterit pitämään "jousia" paikallaan.
Nytku tämä runko oli valmis nii puuttu sarvet ja penkki...
Penkkiä mietinki jo jonkuaikaa, ku aattelin että tuo puikko palaa kevyesti prikasta läpi ja sotkee kaikki paikat, mutta ei. Pikkureiän poltti mutta se ei haitannu.

PRIKKA PENKKI
Sitte sarvet. Nämä oliki sitte taas vaikia saaha ilman että oli mittää kiinnityspaikkaa. Koitin sitte jalalla pitää maajohtoa kiinni ja pihteillä asetella pulttia oikiaan kulmaan... No, menihän se jotenki. Pikkusen piti vasaralla sitte takoa ku laitto toisenki sarven kiinni.

Siihen sarvien väliin jäi just sopiva kolo pienemmälle mutterille, ja sehä kävi lampun paikasta sopivasti 😉.

Koitin hitsailla aina alta ja keskeltä ettei hitsit näkys niin pahasti... Aluksi mietin että oisin hionu aina yhden hitsauksen jälkeen nii lopputulos ois ollu parempi, ja nii ois pitäny tehdäkki. Eihä sinne ennää päässy käsiksi jokapaikkaan, mutta se nyt ei haittaa.





MOOTTORIPYÖRÄ VALMIS
Eihä sitä tiiä jos poitsu saa nuo jotenki rikki nii sittehä sitä voi hioa lisää... ja jos oikein nohevana ois ollu, nii ois tehny pikku lovet joka hitsin kohtaan että ei ois tullu kovin paakkunen 😄

Tuosta linkki vielä tähän moottoripyörään:
https://www.youtube.com/watch?v=w-KVoQXLIro

Mutta siinäpä ne testailut.

Nythä se vaimo alotti tuon sisustus koulun, nii meiän olohuoneha meni TAAS uusiksi, vastaha siellä taas kaikki vaihtu 😆

Mutta nyt onki tulossa pari erinlaista ideaa.
Ihmisethä o tehny nuita sisustustakkoja pahvista, mutta parempi varmaan koittaa vääntää puusta, ettei aivan niin helpolla pala koko kämppä. Sehä on tarkotettu vaan kynttilän polttamiseen, nii korkeutta saa olla tarpeeksi.

PUUTAVARA
Pienellä pudjetilla mennään ja tavara on kierrätettyä. Mutta kerron tästä projektista sitten lisää postauksessa.
Sittehä mulla on näitä 400watin ja 1000watin lamppuja, näille keksinki jo tarkotuksen, mutta siitäki enemmän sitte olohuone postauksessa 😉

1000w LAMPPU
400w LAMPPU
 Tästä jatketaan taas. Sehä alkaa hiihtoloma, eli remonttia tiedossa 😂

Tuosta vielä linkki näiden matalli esineiden tekoon:
LINKKI

Palataan taas.

----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

METALWORKS. BOLTS AND NUT WELDINGS. ENGLISH VERSION



I saw these Nuts and bolt weldings and thought i make some for my son to play with.

I think those weldings were made with mig welder and some professional welder did them 😆. I cant even compare these my "weldings" to those. I hace this old Arc power 1400, but i tryed my best.

WELDING MACHINE
I had some nuts and bolts, but feld like i didnt have enough. I went to store and filled the bag with all sort of nuts, bolts and washers. They did cost abit, but u always need these 😄



Firts a thought i make a dog. It seemed like easy job. Only needed few bolts and nuts.

I would love some workbench that could attach some smaller pieces. I tryed to lock the bolts with groundwire and then holded the other piece with plyers.

WELDING
I lost my nerve few times, cause the dtick didnt burn right and the pieces didnt stuck together 😡 (10millimetre slag 😄)

I have so small sticks and cant really but enymore power to those, cause the stick will burn red all the way 😄

I managet to get it together, but the imprint was horrible 😆

WELDING IMPRINT😂
I tryed to grind it with bench grinder and tremel, but couldnt get to all holes 😢.

Last cleaning with wirebrush that i mounted to drill, and done

WIREBRUSH CLEANING



DOG, Done
It resemblys a dog, but the measurements arent so good  😆

I made all of these welding own video, cause it would be too long anotherwise. I thought people will prefer shorter videos, and dont have to search the timeline if they want to watch some pesific work.

So, heres video link to this dog:
https://www.youtube.com/watch?v=AoY5EN1EtP4

All of these have been made a bit different, but the basicks are same.

-

Found these bearings and i thought i make a bike from those.

BEARINGS
Then i just remake all the mistakes from dog build  😆
But got that done too.



BIKE, ready.
I think it looks like bike. Tires rotate and it stands up 😆. It has some welding marks but it doesnt slow the playing

Heres link to video:
https://www.youtube.com/watch?v=KejQPN2VimI

-

Then from those washers i thought i bend some turtle. I had that spike that i made for the rings and that was good for this project.

IRON CONE
I thought i bang those washers curved and make the turtle shell.
I bang them a lot with socket but needed something to heat them with, so they would doften a bit.
I only had this lighter that went out of cas pretty quick 😣.

HEATING THE WASHER
Next time when i go to store, i will buy good heater for these sort of things Ens 😆

Finally i managet to get 3 washers bended and then the welding started.
Nut to end of the bolt (for head) and 4nuts for feet.
i tightened the shell with 10 millimetre tool and cutted and grinded it with tremel so it wont have any sharp edges. Then the finishing with wirebrush.



TORTOISE, Done
This started to look good. Only thing that points the eye is the neck 😄

-

Then the last one that i made was the motorcycle. I saw one picture that had the motor made from washers, so i thought i give it a try.

MOTOR MADE FROM WASHERS
I used the bech grinder to get it square and added nut to connect the "sylinders"

MOTOR
This looked very nice to my eye 😉
I bought 2 bigger nuts for this and thought i make some tires from those. Those nuts are so wide that it will stand by its own.

TIRES
Then i added some longer bolts to front susbension and shorter to back. It gives the right impression.
Long bolt to frame and nuts to hold it together.
Now the frame was done. Al i had to do now was the bench and the handlebar...
I thought long about this bench. Thought the stick will burn the washer right away, but it holded... small hole but that not bad,

WASHER BENCH
Then the handlebars. These were hard to attach when i had nowhere to lock these. I holded the groundwire under my feet (it holded the frame) then i used plyers to hold the bolt where it should go... After many attemps i got it. Had to use some hammer when they were both welded.

There was some hole between the handlebars... just the right size for smaller nut. It made a nice lamp for it i 😉.

I tryed to weld from bottom and center, so the weldin marks wouldnt show so easyly... First i thought i should grind always after one welding, but i didint... i should, cause the finish would be much nicer. Couldnt clean all the cracks, but thats okay.





MOTORCYCLE, Ready
Dont know if my sone can get these somehow broken, then i can fix the cleaning part.
If i would spend some more time with these, i would make a little nutch at the welding spots, so it wouldnt leave so big lump at the welding spot 😄

Heres the link for this motorcycle:
https://www.youtube.com/watch?v=w-KVoQXLIro

But thats the toy welding for now.

Wife started that interior desing school, so our livingroom will get new look AGAIN... we did just made that old one 😆

Theres some new twist for the livingroom.
People have made the decor fireplaces from cardboard, but i make one from wood, so our house wont burn so easily. Its made for candles, so height should be enough.

WOOD MATERIALS
We have small budjet and the materials are recycled. But i tell more about this when i make the posting.
Then i have these 400wats and 100wats lamps, and i already have some plans for these, but i tell more about that in the livingroom post 😉

1000w LAMP
400w LAMP
 Will be continued. Its skiing vacation, so renovation is in order 😂

Stay toned for more.




Ei kommentteja:

Lähetä kommentti